| MODEL |
2310 |
| Fold |
|
| Type |
Flex 3-section, 5-section |
| Working widths |
|
| Rigid frame |
N/A |
| Option 1 |
--- |
| Option 2 |
--- |
| Option 3 |
--- |
| 2-section |
N/A |
| Option 1 |
--- |
| Option 2 |
--- |
| Option 3 |
--- |
| 3-section |
--- |
| Option 1 |
18-ft. 9-in. |
| Option 2 |
21-ft. 9-in. |
| Option 3 |
24-ft. 9-in. |
| Option 4 |
27-ft. 9-in. |
| Option 5 |
30-ft. 9-in. |
| Option 6 |
33-ft. 9-in. |
| Option 7 |
--- |
| Option 8 |
--- |
| Option 9 |
--- |
| Option 10 |
--- |
| 5-section |
--- |
| Option 1 |
39-ft. 9-in. |
| Option 2 |
45-ft. 9-in. |
| Option 3 |
--- |
| Option 4 |
--- |
| Option 5 |
--- |
| Transport dimensions - width |
|
| Rigid frame |
N/A |
| Option 1 |
--- |
| Option 2 |
--- |
| Option 3 |
--- |
| 2-section |
NA |
| Option 1 |
--- |
| Option 2 |
--- |
| Option 3 |
--- |
| 3-section |
--- |
| Option 1 |
12-ft. 6-in. |
| Option 2 |
12-ft. 6-in. |
| Option 3 |
12-ft. 6-in. |
| Option 4 |
14-ft. 10-in. |
| Option 5 |
14-ft. 10-in. |
| Option 6 |
14-ft. 10-in. |
| Option 7 |
--- |
| Option 8 |
--- |
| Option 9 |
--- |
| Option 10 |
--- |
| 5-section |
--- |
| Option 1 |
15-ft. 11-in. |
| Option 2 |
15-ft. 11-in. |
| Option 3 |
--- |
| Option 4 |
--- |
| Option 5 |
--- |
| Transport dimensions - height |
|
| Rigid frame |
N/A |
| Option 1 |
--- |
| Option 2 |
--- |
| Option 3 |
--- |
| 2-section |
NA |
| Option 1 |
--- |
| Option 2 |
--- |
| Option 3 |
--- |
| 3-section |
--- |
| Option 1 |
8-ft. 8-in. |
| Option 2 |
10-ft. 1-in. |
| Option 3 |
11-ft. 7-in. |
| Option 4 |
11-ft. 7-in. |
| Option 5 |
13-ft. 0-in. |
| Option 6 |
14-ft. 5-in. |
| Option 7 |
--- |
| Option 8 |
--- |
| Option 9 |
--- |
| Option 10 |
--- |
| 5-section |
--- |
| Option 1 |
13-ft. 0-in. |
| Option 2 |
14-ft. 0-in. |
| Option 3 |
--- |
| Option 4 |
--- |
| Option 5 |
--- |
| Operating depth |
|
| Inches |
5-in. max |
| Operating speed |
|
| Miles per hour |
10 mph |
| Horsepower required |
|
| Horsepower per foot |
8-12 hp/ft. |
| Depth control |
|
| Option 1 |
Single point, crank adjusted |
| Option 2 |
--- |
| Option 3 |
--- |
| Hydraulics |
|
| Standard |
3 SCVs required, hydraulic transport lockup |
| Option 1 |
--- |
| Option 2 |
--- |
| Electrical |
|
| Standard |
9-pin connector for warning lights, 12-volt required for 5-section models |
| Option 1 |
Touchset Depth Control: 9-pin connector and Touchset Depth Control connector |
| Option 2 |
--- |
| Hitch |
|
| Type |
Level-Lift T-hitch, cast steel hitch link, hitch jack, hydraulic hose tip storage bracket, CAT V option |
| Frame |
|
| Tubing |
4x4-in. rank tubes, 3x6-in. mainframe fore/aft tubes, 3x5-in. 5-section inner wings fore/aft tubes, 2x5-in. 3-section wings and 5-section outer wing fore/aft tubes |
| Number of ranks |
5 |
| Fore-and-aft |
139-in. |
| Underframe clearance |
24-in. |
| Standard spacings |
|
| Inches |
9-in. |
| Standard options |
|
| Option 1 |
TruPosition Spring-Reset |
| Spec |
3/4 x 1-3/4-in. x 24-in. shanks |
| Trip force, lb. |
200 |
| Trip height, in. |
8-in. |
| Maximum operating depth, in. |
5 |
| Underframe clearance, in. |
24 |
| Spacing |
9-in. |
| Option 2 |
--- |
| Spec |
--- |
| Trip force, lb. |
--- |
| Trip height, in. |
--- |
| Maximum operating depth, in. |
--- |
| Underframe clearance, in. |
--- |
| Spacing |
--- |
| Option 3 |
--- |
| Spec |
--- |
| Trip force, lb. |
--- |
| Trip height, in. |
--- |
| Maximum operating depth, in. |
--- |
| Underframe clearance, in. |
--- |
| Spacing |
--- |
| Disk gangs |
|
| Depth adjustment |
--- |
| Base equipment |
Hydraulic depth adjustment |
| Optional equipment |
--- |
| Maximum depth, in. |
5-in. (even with sweep) |
| Vertical adjustment, in. |
8-in. (from even with the sweeps to 8-in. above) |
| Gang angle, degrees |
8 |
| Blade size, in. |
20 x .197 |
| Blade spacing, in. |
7.25 |
| Blade concavity |
low |
| Type of scrapers |
Combination |
| Type of spool |
Steel Fabricated |
| Gang shaft diameter |
1-1/8-in. |
| Bearings |
Dura-Flex bearing with triple lip on inner race (1, 2, 3) plus a wide seal (4) between outer race and flange prevents dirt from entering between bearings and flanges and helps retain lubrication in the bearings that are greaseable for long life |
| Ground-engaging components |
|
| Options |
10-in. Perma-Loc sweeps |
| Spray attachments |
|
| Options |
N/A |
| Centerframe depth control wheels and tires |
|
| Option 1 |
(18-ft. 9-in.): (4) 9.5L-15 F1 LR D 8 PR walk-over tandems |
| Option 2 |
(21-ft. 9-in. through 24-ft. 9-in.): (4) 11L-15 FI Load Range F walk-over tandems |
| Opton 3 |
(27-ft. 9-in. through 33-ft. 9-in.): (4) 11L-15 FI Load Range F walk-over tandems |
| Option 4 |
(39-ft. 9-in. through 45-ft. 9-in.): (4) 12.5L-16.5 SL Load Range G walk-over tandems |
| Option 5 |
--- |
| Wing frame wheels and tires |
|
| Option 1 |
(18-ft. 9-in.): (4) 7.6L-15 F1 Load Range D walk-over tandems |
| Option 2 |
(21-ft. 9-in. through 24-ft. 9-in.): (4) 9.5L-15 F1 Load Range D walk-over tandems |
| Option 3 |
(27-ft. 9-in. through 33-ft. 9-in.): (4) 11L-15 F1 Load Range D walk-over tandems |
| Option 4 |
(39-ft. 9-in. through 45-ft. 9-in.) (8) 11L-15 FI load range D walk-over tandems |
| Option 5 |
--- |
| Stabilizer wheels |
|
| Option 1 |
Castering with 9.5L-15 tires (RH and LH) |
| Option 2 |
--- |
| Spike tooth harrow |
|
| Option 1 |
Adjustable 6-bar spike-tooth |
| Rank spacing |
12-in. |
| Spike spacing |
10.5-in. |
| Effective spacing |
1.75-in. |
| Spike dimension |
.75 x .75 x 12-in. |
| Angle |
15 - 45 degrees |
| Adjustments |
--- |
| Option 2 |
--- |
| Rank spacing |
--- |
| Spike spacing |
--- |
| Effective spacing |
--- |
| Spike dimension |
--- |
| Angle |
--- |
| Adjustments |
--- |
| Option 3 |
--- |
| Rank spacing |
--- |
| Spike spacing |
--- |
| Effective spacing |
--- |
| Spike dimension |
--- |
| Angle |
--- |
| Adjustments |
--- |
| Coil tine harrow |
|
| Option 1 |
Adjustable 5-bar coil-tine |
| Rank spacing |
15-in. |
| Tine spacing |
12.5-in. |
| Effective spacing |
2.5-in |
| Tine dimensions |
16-in. |
| Angle |
15 - 60 degrees |
| Adjustments |
depth, pitch and angle |
| Option 2 |
--- |
| Rank spacing |
--- |
| Tine spacing |
--- |
| Effective spacing |
--- |
| Spike dimensions |
--- |
| Angle |
--- |
| Adjustments |
--- |
| Option 3 |
--- |
| Rank spacing |
--- |
| Tine spacing |
--- |
| Effective spacing |
--- |
| Spike dimensions |
--- |
| Support |
--- |
| Adjustments |
--- |
| Rolling basket harrow |
|
| Option 1 |
3-Bar Spike with single rolling basket: |
| Spike/tine |
12-in. |
| Rank spacing |
12-in. |
| Spike/tine spacing |
10.5-in. |
| Effective spacing |
3.5-in. |
| Spike/tine dimensions |
3/4 x 3/4 x 12-in. |
| Basket |
--- |
| Basket diameter |
14-in. |
| Bar type |
Spiral blade |
| Bar size |
1/4 x 1-1/2-in. high-carbon steel |
| Bearings |
Dura-Flex, 3-in. dia., self-aligning, greasable |
| Adjustments |
angle and aggressiveness |
| Option 2 |
3-Bar Coil with rolling basket |
| Rank spacing |
15-in. |
| Spike/tine spacing |
9-in. |
| Effective spacing |
3-in. |
| Spike/tine dimensions |
16-in. |
| Basket |
--- |
| Basket diameter |
14-in. |
| Bar type |
spiral round bar |
| Bar size |
3/4-in. |
| Bearings |
Dura-Flex, 3-in. dia., self-aligning, greasable |
| Adjustments |
angle and aggressiveness |
| Option 3 |
--- |
| Spike/tine |
--- |
| Rank spacing |
--- |
| Spike spacing |
--- |
| Effective spacing |
--- |
| Spike dimensions |
--- |
| Support |
--- |
| Basket |
--- |
| Basket diameter |
--- |
| Blade type |
--- |
| Blade size |
--- |
| Bearings |
--- |
| Rear hitch |
|
| Tubing size |
--- |
| Telescoping |
Yes |
| Tongue weight rating |
1000 lb. |
| GVW |
6500 GVW rating |
| Wiring harness for transport lights |
Yes |
| Hydraulic hoses and couplers |
One set |
| Warranty |
|
| Description |
3 year frame and standard warranty |
| Additional feature |
|
| Option 1 |
--- |
| Option 2 |
--- |
| Option 3 |
--- |
| Option 4 |
--- |
| Option 5 |
--- |
| |
|
| Specifications are based on published information at the time of publication. Specifications are subject to change without notice. Contact your local John Deere dealer for more information. |
|
| |
|
| Prices are subject to change without notice. Prices are in dollars and only applicable to products sold in the United States. In all cases, current published price lists and incentive program bulletins will take precedence. All trademarked terms, including John Deere, the leaping deer symbol and the colors green and yellow used herein are the property of Deere & Company, unless otherwise noted. |
|
