| MODEL |
2210 Floating-Hitch |
| Fold |
|
| Type |
3-section, 3-section low transport, 5 section |
| Working widths |
|
| Rigid frame |
NA |
| Option 1 |
--- |
| Option 2 |
--- |
| Option 3 |
--- |
| Option 4 |
--- |
| Rigid over-center fold |
NA |
| Option 1 |
--- |
| Option 2 |
--- |
| Option 3 |
--- |
| Option 4 |
--- |
| 3-section |
--- |
| Option 1 |
23-ft. 6-in. to 38-ft. 6-in. (12-ft. mainframe) |
| Option 2 |
34-ft. 6-in. to 38-ft. 6-in. (15-ft. mainframe) |
| Option 3 |
40-ft. 11-in. to 45-ft. 7-in. (15-ft. mainframe with low transport option) |
| Option 4 |
--- |
| Option 5 |
--- |
| Option 6 |
--- |
| 5-section |
--- |
| Option 1 |
43-ft. 6-in. to 55-ft. 6-in. (12-ft. mainframe) |
| Option 2 |
46-ft. 6-in. to 64-ft. 6-in. (15-ft. mainframe) |
| Option 3 |
--- |
| Option 4 |
--- |
| Transport width |
|
| Rigid frame |
NA |
| Option 1 |
--- |
| Option 2 |
--- |
| Option 3 |
--- |
| Option 4 |
--- |
| 3-section |
--- |
| Option 1 |
16-ft. 5-in. (12-ft. mainframe) |
| Option 2 |
19-ft. 5-in. (15-ft. mainframe) |
| Option 3 |
19-ft. 5-in. (15-ft. mainframe with low transport option) |
| Option 4 |
--- |
| Option 5 |
--- |
| Option 6 |
--- |
| 5-section |
--- |
| Option 1 |
16-ft. 8-in. (12-ft. mainframe) |
| Option 2 |
19-ft. 7-in. (15-ft. mainframe) |
| Option 3 |
--- |
| Option 4 |
--- |
| Transport height |
|
| Rigid frame |
N/A |
| Option 1 |
--- |
| Option 2 |
--- |
| Option 3 |
--- |
| Option 4 |
--- |
| Rigid over-center fold |
N/A |
| Option 1 |
--- |
| Option 2 |
--- |
| Option 3 |
--- |
| Option 4 |
--- |
| 3-section |
--- |
| Option 1 |
10-ft. 4-in. to 17-ft. 7-in. (12-ft. mainframe) |
| Option 2 |
14-ft. 3-in. to 15-ft. 8-in. (15-ft. mainframe) |
| Option 3 |
14-ft. 3-in. (15-ft. mainframe with low transport option) |
| Option 4 |
--- |
| Option 5 |
--- |
| Option 6 |
--- |
| 5-section |
--- |
| Option 1 |
14-ft. to 16-ft. (12-ft. mainframe) |
| Option 2 |
14-ft. 1-in. to 17-ft. 1-in. (15-ft. mainframe) |
| Option 3 |
--- |
| Operating depth |
|
| Inches |
to 5-in. |
| Operating speed |
|
| Miles per hour |
5 to 8 mph |
| Horsepower required |
|
| Horsepower per foot (hp/ft.) |
4-8 PTO hp/ft. (200 lb. shanks may require 1-2 more hp/ft.) |
| Depth control |
|
| Option 1 |
Single Point |
| Option 2 |
AccuDepth |
| Option 3 |
--- |
| Hydraulic requirements |
|
| Standard |
2 SCVs (lift and fold) at 2500 psi for optimum raise times |
| Option 1 |
--- |
| Option 2 |
--- |
| Electrical requirements |
|
| Standard |
9-pin connector for warning lights and Accudepth |
| Option 1 |
--- |
| Option 2 |
--- |
| Hitch |
|
| Type |
Floating T-hitch |
| Frame |
|
| Tubing |
4 x 4-in. high-strength, box beam steel cross tubes through 3X6-in. and 2X5-in. steel fore-aft tubes (patented Tube-Thru-Tube design), welded construction |
| Number of ranks |
5 |
| Fore-and-aft |
134-in. |
| Underframe clearance |
24-in. |
| Standard spacing |
|
| Inches |
4.5, 6, 9-in. |
| Standard options |
|
| Option 1 |
Tru-Position C-Shank |
| Spec |
5/8 X 1-3/4-in. |
| Trip force, lb. |
150 |
| Trip height, in. |
10 |
| Maximum operating depth, in. |
5 |
| Underframe clearance, in. |
24 |
| Spacing |
6, 9-in. |
| Option 2 |
Tru-Position C-Shank |
| Spec |
3/4 X 1-3/4-in. |
| Trip force, lb. |
200 |
| Trip height, in. |
10 |
| Maximum operating depth, in. |
5 |
| Underframe clearance, in. |
24 |
| Spacing |
6, 9-in. |
| Option 3 |
S-tine |
| Spec |
1/2 X 1-3/4-in. |
| Trip force, lb. |
--- |
| Trip height, in. |
--- |
| Maximum operating depth, in. |
--- |
| Underframe clearance, in. |
24 |
| Spacing |
4 1/2-in. |
| Option 4 |
N/A |
| Spec |
--- |
| Trip force, lb. |
--- |
| Trip height, in. |
--- |
| Maximum operating depth, in. |
--- |
| Underframe clearance, in. |
--- |
| Spacing |
--- |
| Ground-engaging components |
|
| Options |
Wide variety of sweeps, shovels, and points |
| Centerframe depth control wheels and tires |
|
| Option 1 |
Walk-Over Tandems (4) 9.5L-15FI load range D tires (20-ft. 6-in. to 38-ft. 7-in. ) |
| Option 2 |
Walk-Over Tandems (4) 11L-15FI load range D tires (40-ft. 6-in. through 45-ft. 7-in.) |
| Option 3 |
Castering front with (2) 11L-15FI load range D tires and Walk-Over tandem rear with (4) 12.5L-15FI load range F tires (5-section - 43-ft. 3-in. to 55-ft. 9-in.) |
| Option 4 |
Castering front with (2) 12.5L-15FI load range F tires and Walk-Over tandem rear with (4) 12.5L-15FI load range F tires(5-section - 46-ft. 5-in. to 64-ft. 6-in.) |
| Option 5 |
--- |
| Wing frame wheels and tires |
|
| Option 1 |
Walk-Over Tandems (4) 9.5L-15FI load range D tires |
| Option 2 |
--- |
| Option 3 |
--- |
| Option 4 |
--- |
| Stabilizer wheels |
|
| Option 1 |
(2) 9.5L-15FI tires on front stabilizer wheels (low transport models) |
| Option 2 |
--- |
| Option 3 |
--- |
| Option 4 |
--- |
| Option 5 |
--- |
| Spike tooth harrow |
|
| Option 1 |
5-bar spike-tooth harrow |
| Rank spacing |
--- |
| Spike spacing |
10-in. |
| Effective spacing |
2-in. |
| Spike dimension |
.75 x .75 x 10-in long |
| Angle |
30 or 45 degrees |
| Adjustments |
angle |
| Option 2 |
N/A |
| Rank spacing |
--- |
| Spike spacing |
--- |
| Effective spacing |
--- |
| Spike dimension |
--- |
| Angle |
--- |
| Adjustments |
--- |
| Option 3 |
--- |
| Rank spacing |
--- |
| Spike spacing |
--- |
| Effective spacing |
--- |
| Spike dimension |
--- |
| Angle |
--- |
| Adjustments |
--- |
| Coil tine harrow |
|
| Option 1 |
3-bar coil-tine harrow |
| Rank spacing |
12-in. |
| Tine spacing |
9-in. |
| Effective spacing |
3-in. |
| Tine dimensions |
.438-in. x 16-in. |
| Angle |
6 choices from aggressive to shallow |
| Adjustments |
down pressure, height (no soil engagement option), pitch, and angle adjustment |
| Option 2 |
4-bar coil-tine harrow |
| Rank spacing |
12-in. |
| Tine spacing |
9-in. |
| Effective spacing |
2.25-in. |
| Tine dimensions |
.438-in. x 16-in. |
| Angle |
6 choices from aggressive to shallow |
| Adjustments |
down pressure, height (no soil engagement option), pitch, and angle adjustment |
| Option 3 |
N/A |
| Rank spacing |
--- |
| Tine spacing |
--- |
| Effective spacing |
--- |
| Tine dimensions |
--- |
| Angle |
--- |
| Adjustments |
--- |
| Rolling basket harrow |
|
| Option 1 |
2-bar coil tine harrow with rolling basket |
| Spike/tine |
2-bars of coil tines |
| Rank spacing |
12-in. |
| Spike/tine spacing |
9-in. |
| Effective spacing |
4.5-in. |
| Spike/tine dimensions |
.438-in. x 16-in. |
| Basket |
no center shaft |
| Basket diameter |
14-in. |
| Bar type |
spiraling rods |
| Bar size |
.875-in. |
| Bearings |
Dura-Flex (3+1) bearings eliminate the need for gang bolt, spacers, washer, and wide bearings and mounts |
| Adjustments |
tine tooth angle, basket down pressure |
| Option 2 |
3-bar spike with rolling basket |
| Spike/tine |
3-bar spike |
| Rank spacing |
--- |
| Spike/tine spacing |
10-in. |
| Effective spacing |
3.33-in. |
| Spike/tine dimensions |
.75 x .75 x 10-in. |
| Basket |
spiral arrangement |
| Basket diameter |
11-in. |
| Bar type |
flat bar |
| Bar size |
--- |
| Bearings |
Dura-Flex bearings with triple-lip seals on the inner race plus a wide seal between the bearing and flange. The bearings are self-aligning and greaseable for longer life. |
| Adjustments |
30 or 45 spike degree and 4 positions for basket down pressure |
| Option 3 |
N/A |
| Spike/tine |
--- |
| Rank spacing |
--- |
| Spike/tine spacing |
--- |
| Effective spacing |
--- |
| Spike/tine dimensions |
--- |
| Basket |
--- |
| Basket diameter |
--- |
| Bar type |
--- |
| Bar size |
--- |
| Bearings |
--- |
| Adjustments |
--- |
| Rear hitch |
|
| Description |
--- |
| Tubing size |
--- |
| Telescoping |
yes |
| Tongue weight rating |
1000 lb |
| SS |
6500 |
| Wiring harness for transport lights |
--- |
| Hydraulic hoses and couplers |
one set |
| Warranty |
|
| Description |
3-year frame and standard warranty |
| Additional feature |
|
| Option 1 |
--- |
| Option 2 |
--- |
| Option 3 |
--- |
| Option 4 |
--- |
| Option 5 |
--- |
| |
|
| Specifications are based on published information at the time of publication. Specifications are subject to change without notice. Contact your local John Deere dealer for more information. |
|
| |
|
| Prices are subject to change without notice. Prices are in dollars and only applicable to products sold in the United States. In all cases, current published price lists and incentive program bulletins will take precedence. All trademarked terms, including John Deere, the leaping deer symbol and the colors green and yellow used herein are the property of Deere & Company, unless otherwise noted. |
|
